| t
| For detaching the ignition plugs position the puller -T40039- on the upper thickest rib -arrow- of the ignition coil with power output stage. |
| t
| If the lower ribs are used, they can be damaged. |
| –
| Release the connectors at all ignition coils and then pull off all connectors at the same time. |
| –
| Pull all ignition coils out of the spark plug shaft with the extractor -T40039-. |
| –
| Insert all ignition coils loosely into the spark plug shaft. |
| –
| Align the ignition coils to the plugs. |
| –
| Fit all plugs simultaneously onto the ignition coils. |
| –
| Press the ignition coils evenly with the hand onto the spark plugs. |
|
|
|
Note
