Octavia Mk2
| High pressure pump - Summary of components |
WARNING
|
| 1 - | Roller tappet |
| q | can remain stuck in the vacuum pump after removing the high pressure pump, removable |
| 2 - | O-ring |
| q | replace |
| 3 - | High pressure pump |
| q | with fuel pressure regulating valve -N276 - |
| q | Fuel high pressure line to high pressure pump: 17 Nm |
| q | Install fuel high pressure line not under tension |
| q | removing and installing → Chapter |
| 4 - | Fuel pressure regulating valve -N276- |
| 5 - | Hole in the vacuum pump for the high pressure pump |
| 6 - | Injection valves |
| q | Replace O-ring and combustion chamber gasket ring (Teflon gasket ring) |
| q | pay attention to correct installation position |
| q | removing and installing → Chapter |
| 7 - | Hall sender -G40- |
| 8 - | Camshaft adjustment valve 1 -N205- |
| 9 - | 10 Nm |
| q | replace |
| 10 - | Connection fitting for fuel feed line |
| 11 - | Connection fitting for fuel high pressure line |
| q | replace |
| q | 22 Nm |
| q | Fuel high pressure line to high pressure pump: 18 Nm |
| q | Install fuel high pressure line not under tension |
