Safety precautions when working on the fuel supply of the diesel direct injection system |
If test and measuring devices are required during test drives observe the following: |
t
| Always secure the test and measuring devices on the rear seat and have a second person operate them there. |
If the test and measuring devices are operated from the passenger seat, the passenger could be injured by the release of the passenger airbag in the event of an accident. |
WARNING Secure the diagnostic device to the rear seat and operate from that position. |
|
Observe the following points to prevent injury to persons and/or damage to the injection and preheating system: |
t
| Disconnect and connect wires of the preheating and injection system as well as measuring device wires when the ignition is switched off. |
t
| If the engine should be run at the starter speed without it actually igniting, then separate the central plug connection for the unit injector at the cylinder head. |
t
| Before disconnecting the battery determine the code of the radio fitted with anti-theft coding. |
t
| Always switch off the ignition before disconnecting and re-connecting the battery. Otherwise the engine control unit may be damaged. |
|
|
|