Octavia Mk2
| Summary of components |
Note| t | The hose connections are secured with spring strap clips or clamp-type clips. |
| t | Always replace clamp-type clips with spring-type clips. |
| t | Use pliers for spring strap clips to fit the spring strap clips. |
| t | Safety precautions when working on the fuel supply system → Chapter. |
| t | Rules of cleanliness when working on the fuel supply system → Chapter. |
| 1 - | Activated charcoal filter |
| q | Fitting position: in right of engine compartment |
| q | as of 01.2005 with ventilation fitting instead of sealing grommet (Pos. 9) |
| 2 - | Pressure holding valve with connection hose |
| 3 - | Connecting hose |
| q | check for firm seating |
| q | from fuel tank |
| 4 - | 10 Nm |
| 5 - | Solenoid valve 1 for activated charcoal filter -N80- |
| q | Valve closed when ignition is switched off |
| q | valve is actuated (pulsed) by engine control unit when engine is warm |
| 6 - | Connecting hose |
| q | To intake manifold |
| q | check for firm seating |
| 7 - | Support |
| q | for activated charcoal filter |
| 8 - | Air admission hose |
| q | up to 12.2004 |
| 9 - | Sealing grommet |
| q | up to 12.2004 |
