skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replace sealing flange -on the gearbox side-|Install > < Replace sealing flange -on the gearbox side-

Octavia Mk2

Removing
Removing
l  Gearbox removed.
–  Remove the two-mass flywheel → Chapter.
   
–  Remove the intermediate plate from the dowel sleeves and unhook from sealing flange -arrows-.
–  Position crankshaft on TDC for cylinder 1 → Fig..
–  Removing the oil pan → Chapter.
  S13-0541
–  Remove engine speed sender -G28--1-.
–  Release the fixing screws of the rear sealing flange.
  S23-0201
–  Screw 3 screws M6 x 35 mm into the threaded bores of the sealing flange -arrows-.
–  Press out sealing flange together with rotor from the crankshaft by alternately screwing the screws into the sealing flange.
  S13-0522

Replace sealing flange -on the gearbox side-|Install > < Replace sealing flange -on the gearbox side-