Octavia Mk2
Parts of the cooling system fitted to engine for engine with engine identification characters BKD, AZV |
1 - | Radiator for exhaust gas recirculation |
q | removing and installing → Chapter |
2 - | to heat exchanger |
q | Coolant feed line |
q | connection diagram for coolant hoses → Chapter |
3 - | Hose |
q | to flap of radiator for exhaust gas recirculation |
4 - | 10 Nm |
5 - | The coolant pipe at the rear |
6 - | Retaining clip |
q | check tightness |
7 - | O-ring |
q | replace |
8 - | Coolant temperature sender -G62- |
q | with coolant temperature gauge sensor -G2- |
9 - | Hose |
q | to radiator for exhaust gas recirculation |
q | connection diagram for coolant hoses → Chapter |
10 - | Connection fittings |
q | at cylinder head |
q | with coolant temperature sender -G62- |
11 - | from heat exchanger |
q | Coolant return-flow line |
q | connection diagram for coolant hoses → Chapter |
12 - | 40 Nm |
13 - | Hose |
q | to cylinder head |
14 - | Hose |
q | to rear pipe |
15 - | small distributor part |
16 - | Hose |
q | to the distributor parts |
17 - | Hose |
q | To connection fitting at cylinder head |
18 - | Hose |
q | towards top radiator |
19 - | Distributor part |
20 - | 15 Nm |
21 - | Hose |
q | from oil cooler |
22 - | to bottom of coolant expansion reservoir |
q | connection diagram for coolant hoses → Chapter |
23 - | Coolant pipe |
24 - | Hose |
q | to bottom radiator |
25 - | Coolant temperature sender at radiator outlet -G83- |
26 - | Connection fittings |
q | with coolant regulator |
q | with coolant temperature sender at radiator outlet -G83- |
27 - | Coolant regulator |
q | removing and installing → Chapter |
q | check: heat up regulator in a water bath |
Start of opening approx. 87 °C |
Full opening: approx. 102 °C |
Stroke: minimum 7 mm |
28 - | Hose |
q | to oil cooler - connection from cylinder block |
29 - | Oil cooler |
q | removing and installing → Chapter |
30 - | Coolant pump |
q | check smooth operation |
q | Check fitting position |
q | removing and installing → Chapter |
31 - | to top of coolant expansion reservoir |
q | connection diagram for coolant hoses → Chapter |
32 - | Top coolant pipe |
q | bolted to intake manifold |
33 - | Hose |
q | from the flap of the radiator for exhaust gas recirculation to the top coolant pipe (Position 32) |
34 - | Radiator flap for exhaust gas recirculation |
q | removing and installing → Chapter |