| Removing and installing charge air cooler |
| –
| Removing coolant cooler. |
| t
| Engine identification characters BKD, AZV: → Chapter |
| t
| Engine identification characters BMM: → Chapter |
| –
| Remove connecting hoses from charge air cooler, if it is not yet performed. |
| –
| Release the screws of the brackets for charge air cooler. |
| t
| Vehicles with engine identification characters BKD, AZV: → Chapter, Position 1 |
| t
| Vehicles with engine identification characters BMM: → Chapter, Position 1 |
WARNING | Do not open the refrigerant circuit of the air conditioning system. |
|
Caution | To avoid causing damage to the condenser and to the refrigerant lines and hoses make sure the lines and hoses are not over-extended, kinked or bent. |
|
Note | For the following work, a second mechanic is required to hold the charge-air cooler. |
| –
| Swivel the charge air cooler towards the rear, remove the lateral bearings and unhook out of the lower bearings. |
|
|
|
