Octavia Mk2
| Structure of the refrigerant circuit |
Note| All air conditioning components marked * as well as all refrigerant hoses and refrigerant lines must be repaired or replaced in service centres, as the refrigerant must first be drained off at a service position. |
| HP = High-pressure side |
| LP = Low-pressure side |
| 1 - | Regulating valve for compressor, air conditioning system - N280-* |
| 2 - | Compressor* |
| 3 - | Belt pulley |
| q | with anti-lock device |
| 4 - | Oil drain plug* |
| 5 - | Pressure relief valve* |
| 6 - | High-pressure sender -G65- |
| 7 - | Connection with valve* |
| 8 - | Condenser* |
| 9 - | Fluid container with dessicator insert* |
| 10 - | Extractor, filler and measurement valve* |
| q | High-pressure side |
| 11 - | Screw cap |
| 12 - | Expansion valve* |
| 13 - | Evaporator* |
| 14 - | Extractor and measurement valve* |
| q | Low-pressure side |
| 15 - | Screw cap |
| 16 - | Shock absorber* |
| q | for damping of pressure fluctuations |
| q | only fitted on certain models |
