skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the four-wheel drive control unitJ492|Install > < Removing and installing the four-wheel drive control unitJ492

Octavia Mk2

Removing
Removing
–  Switch off ignition.
   
–  Separate plug connections -1- and -2- at the top of the control unit.
–  Place catch pan under the final drive.
  N39-10090
–  Release screws -arrows-.
Ensure that no parts fall down when removing the control unit.
–  Carefully remove the control unit -A-.
  A39-10049
–  If necessary remove the cover → Chapter Pos. 3 from the housing of the Haldex coupling, while doing so hold the valve -arrow-.
  N39-10416
–  Cover the control valve for opening degree of coupling -N373--arrow- with a cloth. Carefully grip the valve body -arrow- with pliers and pull out the valve.
  N39-10416

Removing and installing the four-wheel drive control unitJ492|Install > < Removing and installing the four-wheel drive control unitJ492