skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Inspect operation of Haldex coupling > < Checking the gear oil level in the rear "final drive 02D/0AV"

Octavia Mk2

Checking the gear oil level in the rear „final drive OBR“
Checking the gear oil level in the rear „final drive OBR“
Special tools and workshop equipment required
t  Filling device -VAS 6291-
t  Catch pan
Oil specification → Chapter.
l  Vehicle on level ground.
–  Place a catch pan under the rear final drive.
   
–  Unscrew screw -1- for oil inspection.
  Note
Never release the following screws: -2- (drain plug for rear final drive), -A- (filler screw for Haldex coupling) and -B- (drain plug for Haldex coupling).
Oil is at the correct level if the rear final drive is filled up to the lower edge of the oil filler hole.
–  Screw in screw -1- and tighten to tightening torque.
If re-filling, do the following:
–  Unscrew screw -1- for oil inspection.
–  Pour in axle oil up to lower edge of filler hole.
–  Screw in screw -1- and tighten to tightening torque.
  N39-10358
Tightening torque
ComponentNm
Screw for oil inspection M 1015

   

Inspect operation of Haldex coupling > < Checking the gear oil level in the rear "final drive 02D/0AV"