Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing the pump for Haldex coupling (final drive "OBR")|Install >
< Removing and installing the pump for Haldex coupling (final drive "OBR")
Octavia Mk2
Power transmission
Gearbox 02S
Final drive, differential, differential lock
Disassembling and assembling Haldex coupling / moving_and_installing_the_pump_for_haldex_coupling_(final_drive_quot;obrquot;)/">Removing and installing the pump for Haldex coupling (final drive "OBR")
Removing
Removing
Removing
–
Switch off ignition.
–
Place catch pan under the final drive.
–
Release check screw
-B-
.
–
Unscrew drain plug
-A-
and completely drain high efficiency oil for Haldex couplings.
–
Screw in new drain plug
-A-
and tighten to the prescribed tightening torque.
–
Slightly lower the final drive, to do so the fixing screw
-arrow-
must be released by approx. 5 turns at the front bracket of the final drive.
–
Disconnect plug
-arrow-
for the pump from the control unit.
–
Unclip the wiring loom
-A-
from the holders and expose.
–
Screw out the fixing screws
-1-
of the pump for Haldex coupling -V181-
-2-
.
–
Pull the pump for Haldex coupling -V181- out of the Haldex housing
-direction of arrow-
, to do so guide through the wiring loom
-3-
.
Power transmission
Gearbox 02S
Final drive, differential, differential lock
Disassembling and assembling Haldex coupling / moving_and_installing_the_pump_for_haldex_coupling_(final_drive_quot;obrquot;)/">Removing and installing the pump for Haldex coupling (final drive "OBR")
Removing
Removing and installing the pump for Haldex coupling (final drive "OBR")|Install >
< Removing and installing the pump for Haldex coupling (final drive "OBR")