skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing the right flange shaft gasket ring (four-wheel drive) > < Removing

Octavia Mk2

Install
Install
   
–  Drive the new seal ring in up to the stop, do not twist the seal ring.
–  Fill half the space between the sealing lip and dust lip with sealing grease -G 052 128 A1-.
–  Insert the flange shaft.
–  Secure the flange shaft with the conical screw and tighten with tightening torque.
–  Install drive shafts on gearbox → Chassis; Rep. gr.40.
–  Check gear oil level → Chapter.
–  Install the front left wheelhouse liner → Body Work; Rep. gr.66.
–  Install the noise insulation → Body Work; Rep. gr.50.
–  Install wheel → Chassis; Rep. gr.44.
  S39-0286
Tightening torque
Flange shaft on gearbox (conical screw) → Chapter

   

Replacing the right flange shaft gasket ring (four-wheel drive) > < Removing