skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Summary of components - Gearshift mechanism as of 11.06 > < Removing and installing gearshift knob with shift lever cover (Octavia II)

Octavia Mk2

Summary of components - Shift mechanism up to 10.06 (Octavia II)
Summary of components - Shift mechanism up to 10.06 (Octavia II)
  Note
Grease all bearing and contact surfaces with grease -G 000 450 02-.
   
1 - Cover
q   bend up tabs for removing
q   always replace → Electronic Catalogue of Original Parts
2 - Gasket
q   always replace → Electronic Catalogue of Original Parts
3 - Shift lever
4 - O-ring
q   in case of damage replace → Electronic Catalogue of Original Parts
5 - Locking clip
q   do not damage cables when removing
q   always replace → Electronic Catalogue of Original Parts
6 - Selector cable
q   removing and installing → Chapter
q   Fitting position → Chapter
q   adjust → Chapter
7 - Shift cable
q   removing and installing → Chapter
q   Fitting position → Chapter
q   adjust → Chapter
8 - Lock washer
q   always replace → Electronic Catalogue of Original Parts
9 - Buffer
q   for pressure spring Pos. 26
10 - Bearing shell
11 - Cover
12 - Bushing
13 - Circlip
q   removing and installing → Fig.
14 - Pressure spring
q   removing and installing → Fig.
15 - Bushing
16 - 5 Nm
17 - Circlip
q   always replace → Electronic Catalogue of Original Parts
18 - Bushing
19 - Shift lever guide
20 - Nut M8 - 25 Nm, Nut M6 - 8 Nm
21 - Gasket
q   between shift housing and underbody
q   self-adhesive
22 - Shift housing
23 - Bushing
24 - Bearing bolt
25 - Guide bush
q   push onto shift housing
26 - Pressure spring
q   installing → Fig.
27 - 5 Nm
28 - Selector angle plate

   
Removing and installing circlip
–  Hold the gearshift lever -2-.
–  Press the distance sleeve -3- in the direction of the arrow.
–  Remove lock washer -1-.
  S34-0972
Install pressure spring
–  Insert the clamp -A- of the pressure spring from the top into the guide -1-.
–  Press the clamp -B- of the pressure spring downwards and insert from the bottom into the guide.
  Note
The illustration shows without the removed selector angle plate.
  S34-0973

Summary of components - Gearshift mechanism as of 11.06 > < Removing and installing gearshift knob with shift lever cover (Octavia II)