skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replace gasket ring in single version (together with bushing) for right flange shaft|Install > < Replace gasket ring in single version (together with bushing) for right flange shaft

Octavia Mk2

Removing
Removing
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Turn steering to full right lock.
   
–  If applicable remove cap for drive shaft from the engine.
  S39-0282
–  Unscrew the drive shaft -1- from the flange shaft → Chassis; Rep. gr.40.
–  Tie up the drive shaft as far as possible. Avoid damaging the paintwork on the drive shaft during this operation.
–  Position the catch pan under the gearbox and the engine.
–  If necessary, unscrew oil return-flow line for exhaust turbocharger from engine -arrow- → Engine; Rep. gr.21.
  N39-0824
–  Unscrew the fixing screw for the flange shaft, to this end insert two screws in the flange and using a tyre iron hold the shaft.
–  Remove flange shaft together with pressure spring.
  V34-2737
–  Pull out gasket ring together with bushing.
A leg is located in the inner diameter of the bushing.
–  Position the extraction hook -VW 771/37 (MP3-419/37) - directly behind the leg in the bushing.
–  Press the extraction hook -VW 771/37 (MP3-419/37)- forcefully into the bushing during the extraction process.
  N39-1187

Replace gasket ring in single version (together with bushing) for right flange shaft|Install > < Replace gasket ring in single version (together with bushing) for right flange shaft