skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing shift cable and selector cable|Install > < Removing and installing shift cable and selector cable

Octavia Mk2

Removing
Removing
–  Remove gearshift mechanism (Octavia II) → Chapter.
–  Remove gearshift mechanism (Superb II) → Chapter.
–  Remove gearshift mechanism (Yeti) → Chapter.
   
–  Bend up tabs -arrows- of cover for the shift mechanism using a screwdriver and remove cover.
–  Remove gasket ring.
Vehicles up to 10.06
  S34-0971
–  Remove circlips -1,2,3,4- and remove shift cable and selector cable from shift housing.
Vehicles as of 11.06
  S34-1019
–  Remove lock washers -2 and 3- (lock washers -1 and 4- are no longer available), selector cable and shift cable must be levered off from the shift lever or selector lever e.g. with a screwdriver.
Continued for all vehicles
–  Remove shift cable and selector cable from shift housing.
  S34-1019
Unlock catches -A- for shift cable and selector cable as follows:
–  Slide sliding sleeve forwards up to the stop -arrow 1-.
–  Turn sliding sleeve to the right up to the stop -arrow 2- until it locks audibly.
–  Remove the catches from the cables.
  S34-1022
–  Remove circlips -1- and -2-.
–  Remove the cable support from the cables.
  S34-1020

Removing and installing shift cable and selector cable|Install > < Removing and installing shift cable and selector cable