Octavia Mk2
| Summary of components - gasket rings and rigid shaft (Octavia II, Superb II, Yeti) |
| 1 - | Sealing ring |
| q | for the right rigid shaft |
| q | replace → Chapter |
| q | for right flange shaft |
| q | replace → Chapter |
| 2 - | Right rigid shaft (up to „11.08“) |
| q | removing and installing → Chapter |
| q | as of „11.08 “ replaced by flange shaft → Fig. |
| q | removing and installing → Chapter |
| 3 - | O-ring |
| q | replace → Electronic Catalogue of Original Parts |
| q | not present if the flange shaft is installed |
| 4 - | Circlip |
| q | insert into the round slot of the rigid shaft |
| q | replace → Electronic Catalogue of Original Parts |
| q | not present if the flange shaft is installed |
| 5 - | Conical screw, 30 Nm |
| q | replace → Electronic Catalogue of Original Parts |
| 6 - | Sealing ring |
| q | for the left rigid shaft |
| q | replace → Chapter |
| q | for left flange shaft |
| q | replace → Chapter |
| 7 - | Left rigid shaft (up to „11.08“) |
| q | removing and installing → Chapter |
| q | as of „11.08 “ replaced by flange shaft → Fig. |
| q | removing and installing → Chapter |
| 8 - | O-ring |
| q | replace → Electronic Catalogue of Original Parts |
| q | not present if the flange shaft is installed |
| 9 - | Circlip |
| q | insert into the round slot of the rigid shaft |
| q | replace → Electronic Catalogue of Original Parts |
| q | not present if the flange shaft is installed |
| 10 - | Conical screw, 30 Nm |
| q | replace → Electronic Catalogue of Original Parts |
|
|
