Octavia Mk2
|
| 1 - | Mounting part |
| 2 - | Screw cap |
| q | replace the O-ring if it is damaged |
| 3 - | Earth connection |
| 4 - | 11 Nm |
| 5 - | Guide |
| 6 - | 25 Nm |
| q | replace |
| 7 - | Fuel tank |
| q | when removing, support using the engine/gearbox jack, e.g. -V.A.G 1383 A- |
| q | removing and installing → Chapter |
| 8 - | Circlip |
| 9 - | Bracket for the exhaust system |
| 10 - | Tensioning strap |
| q | Check fitting position |
| 11 - | Heat shield |
| 12 - | Sealing ring |
| q | replace |
| q | to be inserted dry into the opening of the fuel tank |
| q | must be moistened on the inside with fuel before assembly of the fuel delivery unit |
| 13 - | Fuel delivery unit |
| q | with sender for fuel gauge display |
| q | removing and installing → Chapter |
| q | note the correct installed position of the fuel tank → Fig. |
| q | inspecting fuel pump → Chapter |
| q | Clean strainer if dirty |
| q | removing and installing the sender for fuel gauge → Chapter |
| 14 - | Lock ring, 110 Nm |
| q | use wrench -T30101 (3087)- for removing and installing |
| q | pay attention to correct position |
| 15 - | Return-flow line |
| q | from fuel filter |
| q | clipped in place on fuel tank |
| q | pay attention to correct position |
| q | blue |
| 16 - | Feed line |
| q | to fuel filter |
| q | clipped in place on fuel tank |
| q | pay attention to correct position |
| q | black |
| 17 - | Fuel tank lid unit |
| q | with rubber bowl |
| q | Removing and installing → Body Work; Rep. gr.55 |
Note
