Octavia Mk2
Radiator with two radiator fans - Summary of components |
1 - | Top coolant hose |
q | To connection fitting at cylinder head |
2 - | O-ring |
q | replace |
3 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
4 - | Gasket |
5 - | Screw cap |
6 - | Connector |
7 - | 2 Nm |
8 - | Expansion reservoir |
q | Check the cooling system for tightness → Chapter |
q | Test pressure 0.14...0.16 MPa (1.4 ...1.6 bar) - overpressure |
9 - | Support |
q | for radiator |
10 - | 5 Nm |
11 - | Bearings |
12 - | Fan shroud |
q | removing and installing → Chapter |
13 - | Right radiator fan -V35- |
14 - | Radiator fan -V7- |
q | with radiator fan control unit -J293- |
15 - | Bottom coolant hose |
q | to the connection fitting for the coolant regulator |
16 - | Retaining clip |
17 - | Thermoswitch or sender |
Depending upon vehicle equipment: |
q | Thermoswitch for radiator fan - F18- |
q | three-pin plug |
switching temperatures: |
q | 1. Stage: 92 - 97 °C on; 84 °C off |
q | 2. Stage: 99 - 105 °C on; 91 °C off |
or |
q | Coolant temperature sender at radiator outlet -G83- |
q | two-pin plug |
18 - | O-ring |
q | replace |