Octavia Mk2
| Sealing flanges and flywheel - Summary of components |
| 1 - | 15 Nm |
| 2 - | Sealing ring |
| q | replace → Chapter |
| q | do not oil |
| 3 - | Sealing flange on the belt pulley side |
| q | must be positioned on dowel sleeves |
| q | removing and installing → Chapter |
| 4 - | Threaded pin, 10 Nm |
| q | insert using locking agent -D 000 600 A2- |
| 5 - | Cylinder block |
| 6 - | Sealing ring |
| q | replace |
| 7 - | Screw plug - 100 Nm |
| 8 - | 60 Nm + torque a further 90° (1/4 turn) |
| q | replace |
| 9 - | Flywheel/drive plate |
| q | for removing and installing the flywheel use flywheel lock -MP 1-504- or -MP 1-223- (fit onto starter ring gear, if the engine is fastened in the engine mount -MP1-202- at the assembly stand -MP9-101-) |
| q | removing and installing driver disc → Chapter |
| q | Installation is only possible in one position through offset holes |
| 10 - | Intermediate plate |
| q | must be positioned on dowel sleeves |
| q | do not damage/bend during assembly work |
| q | inserted on sealing flange → Fig. |
| 11 - | Sealing flange on the gearbox side |
| q | Only possible to replace complete with gasket ring |
| q | removing and installing → Chapter |
| q | do not oil |
|
|
