skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Installing the engine > < Removing engine

Octavia Mk2

Securing the engine to the assembly stand
Securing the engine to the assembly stand
Special tools and workshop equipment required
t  Engine mount -MP1-202- or -VAS 6095-
t  Hook -MP1-202/10-
t  Assembly stand -MP9-101-
t  Lifting device -MP9-201 (2024A)-
t  Bushing -T30010 (VW 540/1B)-
t  Workshop crane, e.g. -VAS 6100-
Precondition
l  Separate engine from gearbox.
  WARNING
Use securing pins on the hooks and rig pins to prevent release.
   
–  Attach lifting device -MP9-201- at engine and at workshop crane e.g. -VAS 6100-.
belt pulley side
t  2. Hole of the attachment in Position 1
Flywheel side
t  4. Hole of the attachment in Position 8
  Note
The illustration shows a pump injector engine. The attachment for the Common Rail engine occurs in the same way.
–  Lift off engine with installed engine mount -T10012- with workshop crane from engine/gearbox jack.
–  Remove engine mount -T10012-.
  S10-0175
–  For carrying out assembly work, attach the engine with engine mount -MP1-202-, hooks -MP1-202/10- and sleeves -T30010- or engine mount -VAS 6095- to the assembly stand -MP9-101-. The figure shows the 1.9 ltr./47 kW SDI Engine. The fixing system is identical.
  S10-0123

Installing the engine > < Removing engine