Octavia Mk2
| Radiator with a radiator fan - Summary of components |
| 1 - | Radiator |
| q | removing and installing → Chapter |
| q | after replacing fill entire system with fresh coolant → Chapter |
| 2 - | Screw cap |
| q | Test pressure 0.14...0.16 MPa (1.4...1.6 bar) |
| q | check → Chapter |
| 3 - | Connector |
| 4 - | 3 Nm |
| 5 - | Expansion reservoir |
| 6 - | O-ring |
| q | replace if damaged |
| 7 - | Bottom coolant hose |
| q | to connection fitting of 4/2 way valve with coolant regulator at cylinder block |
| q | connection diagram for coolant hoses → Chapter |
| 8 - | Radiator fan -V7- |
| q | removing and installing → Chapter |
| 9 - | Fan shroud |
| q | removing and installing → Chapter |
| 10 - | 5 Nm |
| 11 - | Connector |
| 12 - | 5 Nm |
| 13 - | Top coolant hose |
| q | To connection fitting at cylinder head |
| q | connection diagram for coolant hoses → Chapter |
