skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Checking hydraulic balancing elements > < Removing and installing camshafts

Octavia Mk2

Measuring the axial play of the camshafts
Measuring the axial play of the camshafts
Special tools and workshop equipment required
t  Universal dial gauge holder -MP3-447 (VW 387)-
t  Dial gauge, e.g. -VAS 6079-
Work procedure
–  Remove bearing frame → Chapter.
   
–  Attach the dial gauge with the universal dial gauge holder -MP3-447 (VW 387)- to the bearing frame as shown in the illustration.
–  Press the camshaft by hand against the dial gauge.
–  Position dial gauge to „0“.
–  Press the camshaft off the dial gauge and read the value.
Axial play of inlet camshaft and outlet camshaft:
l  Wear limit 0.17 mm
  A15-10637

Checking hydraulic balancing elements > < Removing and installing camshafts