skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing amplifier R12 (as of MY 09) > < Overall view of the equipment Soundsystem

Octavia Mk2

Removing and installing amplifier R12 (up to MY 08)
Removing and installing amplifier -R12- (up to MY 08)
Removing
–  Switch off all electrical components and take out the ignition key.
Left-hand drive vehicles:
–  Remove the driver's seat → Body Work; Rep. gr.72.
Right-hand drive vehicles:
–  Remove front passenger seat → Body Work; Rep. gr.72.
Continued for all vehicles:
   
–  Unclip clips -2-.
–  Remove cover from amplifier.
–  Unplug connector -1-.
–  Release nuts -arrows- (5,5 Nm).
–  Remove amplifier.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  When replacing, code the new control unit with the → Vehicle diagnostic tester.
  S91-0113

Removing and installing amplifier R12 (as of MY 09) > < Overall view of the equipment Soundsystem