Slacken the upper rearview mirror cover -2- from the catches -arrows- and remove the cover towards the top -movement arrows- from out of the mirror housing.
–
Remove the socket with the light bulb -2- from the door entry lighting.
–
Release screws -arrows- (0.8 Nm) and unhook the lower rearview mirror housing cover -1- to the bottom.
–
Screw out screws -4- (0.5 Nm) and slacken the side turn signal -5- out of the lower cover.
–
Unplug connector -1-.
Install
Installation is performed in the reverse order, pay attention to the following points:
–
Perform a functional test (illumination, mirror adjustment).