Roomster
| Removing and installing ignition system |
| 1 - | Ignition coils with power output stage -N70-, -N127-, -N291- |
| q | check → Vehicle diagnosis, testing and information system VAS 5051 |
| q | resistances → Chapter |
| q | removing → Chapter |
| 2 - | Connector |
| q | for iIgnition coils with power output stage -N70-, -N127-, -N291- |
| q | 4-pin |
| 3 - | Connector |
| q | for knock sensor - G61- |
| q | 2-pin |
| 4 - | 20 Nm |
| q | The tightening torque influences the knock sensor function |
| 5 - | Knock sensors -G61- |
| 6 - | 8 Nm |
| 7 - | Connector |
| q | for camshaft position sensor -G163- |
| q | 3-pin |
| 8 - | Camshaft position sensor -G163- |
| 9 - | O-ring |
| q | replace |
| 10 - | Connector |
| q | for engine speed sender -G28- |
| q | 3-pin |
| 11 - | Engine speed sender -G28- |
| 12 - | 8 Nm |
| 13 - | Spark plug, 30 Nm |
| q | Type and electrode spacing → Roomster |
| q | use spark plug wrench (e.g. -3122 B-) for removing and installing |
