Roomster
Radiator with radiator fan - Summary of components |
1 - | Clamp |
2 - | Top coolant hose |
q | connection diagram for coolant hoses → Chapter |
3 - | Expansion reservoir |
q | Check the cooling system for tightness → Chapter |
4 - | Screw cap |
q | Check pressure relief valve → Chapter |
5 - | 2 Nm |
6 - | Connector |
7 - | Coolant hose |
8 - | Radiator bearing |
9 - | 8 Nm |
10 - | Clamp |
11 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant → Chapter |
12 - | Fan shroud with radiator fan -V7- |
q | The fan shroud may have another shape depending on the version of the vehicle |
q | Summary of components → Chapter |
q | removing and installing → Chapter |
13 - | Bottom coolant hose |
14 - | Charge air cooler |
q | can only be removed and installed together with the radiator → Chapter |
15 - | Bottom bearing |
16 - | Clamp |
17 - | Connector |
q | for radiator fan -V7- |
18 - | Thermo-switch for radiator fan -F18-, 35 Nm |
q | three-pin plug |
q | switching temperatures: |
l | 1. Stage on: 92 ... 97 °C; off: 84 ... 91 °C |
l | 2. Stage on: 99 ... 105 °C; off: 91 ... 98 °C |
19 - | Sealing ring |
q | replace |
20 - | AC condenser |
q | removing and installing → Heating, Air Conditioning; Rep. gr.87 |