Roomster
| Ignition system - Summary of components |
| 1 - | Connector |
| q | black, 4 pin |
| q | release with assembly device -T10118- |
| 2 - | Ignition coils with power output stage -N70-, -N127-, -N291- and -N292- |
| q | removing and installing → Chapter |
| 3 - | Connector |
| q | black, 2 pin |
| q | Knock sensor 1 -G61- |
| q | contacts gold-plated |
| 4 - | Knock sensor 1 -G61- |
| q | Contacts of connector gold-plated |
| 5 - | 20 Nm |
| q | the tightening torque influences the knock sensor function |
| 6 - | Connector |
| q | black, 3 pin |
| q | for hall sender -G40- |
| 7 - | Hall sender -G40- |
| q | on camshaft housing → Chapter |
| 8 - | O-ring |
| q | replace if damaged |
| 9 - | 10 Nm |
| 10 - | Spark plug, 30 Nm |
| q | Pay attention to part number, model and electrode spacing |
| t | → BookletFabia II |
| t | → BookletRoomster |
| t | → BookletRapid |
| q | use spark plug wrench, e.g. -3122B- for removing and installing |
| 11 - | Cable guide |
| 12 - | Earth connection |
| 13 - | 10 Nm |
| q | only loosen or tighten with the ignition off |
