skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the front treble speaker > < Loudspeaker arrangement

Roomster

Removing and installing the front and rear bass speaker
Removing and installing the front and rear bass speaker
Removing
–  Switch off the ignition and all electrical components.
–  Remove the door trim panel from which the loudspeaker is removed → Body Work; Rep. gr.70.
–  Disconnect socket connector at the loudspeaker.
   
–  Use a suitable drill to drill open the four rivets -arrows- and take out the faulty speaker.
  Note
t  It is important to remove all the drillings from the door since they can otherwise lead to corrosion.
t  Any damage to the paintwork which is caused by drilling out the rivets must be repaired immediately by a specialist.
Install
–  Installation is carried out in the reverse order.
–  Attach the new speaker with matching blind rivets.
  N91-0064

Removing and installing the front treble speaker > < Loudspeaker arrangement