–
| Turn the spindle in the flaring tool up to the stop. |
–
| Turn back the flange again. |
–
| Loosen the Allan screws crosswise. |
–
| Take the brake line out of the flaring tool, clean and check the brake line as well as the flaring head. |
Briefly rinse the part of the brake line remaining in the the vehicle: |
–
| Connect the brake filling and bleeding device -VAS 5234-, fit the hose of the bleeding bottle onto the flaring head of the brake line and allow the brake filling and bleeding device -VAS 5234- to run briefly until some brake fluid has passed through. |
–
| Blow through the newly inserted brake line with compressed air. |
|
|
|