skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Air quality sensorG238 > < Removing and installing the front air distribution flap control motorV426

Yeti

Removing and installing fresh air blower control unitJ126
Removing and installing fresh air blower control unit -J126-
  Note
The fresh air blower control unit -J126- is not arranged as a separate component.
Self-diagnosis and fault indication
The fresh air blower control unit -J126- is equipped with self-diagnosis, which facilitates the fault finding.
For fault finding use the → Vehicle diagnostic tester in the function „Targeted fault finding“.
Removing
–  Switch off the ignition and all electrical components.
–  Remove fresh air blower -V2- → Chapter.
   
–  Disconnect plug connection -1-.
–  Release the screws -2- and remove the control unit -3-.
Install
Installation is carried out in the reverse order.
  S87-0325

Air quality sensorG238 > < Removing and installing the front air distribution flap control motorV426