Yeti
| Summary of components - Gasket rings (Yeti) |
Note| Do no simultaneously remove both left and right flange shafts. If the differential bevel gears twist, it will be difficult to reinstall the flange shafts. |
| 1 - | Conical screw, 30 Nm |
| q | always replace → Electronic Catalogue of Original Parts |
| 2 - | Right flange shaft |
| 3 - | Sealing ring |
| q | on the right flange shaft |
| q | replace after removing the right flange shaft → Chapter |
| 4 - | Needle bearing (polygon bearing) |
| q | replace → Chapter |
| q | sluggish on removed flange shaft, this is not a sign of a defective bearing |
| 5 - | Lock washer |
| q | always replace → Electronic Catalogue of Original Parts |
| q | secures the needle bearings (polygon bearing) on the right flange shaft Pos. 2 |
| 6 - | Oil filler plug, 15 Nm |
| q | for angle gearbox |
| q | Inspecting oil level in the angle gearbox → Chapter |
| q | always replace → Electronic Catalogue of Original Parts |
| 7 - | 40 Nm |
| q | for angle gearbox to gearbox |
| q | 4 pieces |
| q | always replace → Electronic Catalogue of Original Parts |
| 8 - | 475 Nm |
| q | Screwing off and on → Chapter |
| q | always replace → Electronic Catalogue of Original Parts |
| q | coat with locking agent -D 000 600- |
| 9 - | Angle gearbox output flange |
| 10 - | Cover cap for output flange |
| q | replace if damaged |
| 11 - | Sealing ring |
| q | for angle gearbox output flange |
| q | replace → Chapter |
| 12 - | Angle gearbox |
| q | Always remove the angle gearbox together with the gearbox → Chapter. |
| q | separate the angle gearbox and the gearbox outside the vehicle → Chapter |
| 13 - | Sealing ring |
| q | in the angle gearbox to the gearbox |
| q | replace → Chapter |
| 14 - | Lever/gearshift shaft |
| 15 - | Gasket for gearshift shaft |
| q | replace → Chapter |
| 16 - | Automatic Gearbox DSG - 02E |
| 17 - | Seal ring for left flange shaft |
| q | replace → Chapter |
| 18 - | Flange shaft left |
| q | disassembling and assembling → Fig. |
| q | Remove and install protective ring for flange shaft → Fig. |
| 19 - | Sealing ring |
| q | in the gearbox to the angle gearbox |
| q | replace → Chapter |
| 20 - | Nut, 20 Nm |
| q | always replace → Electronic Catalogue of Original Parts |
| 21 - | Oil drain plug, 60 Nm |
| q | for angle gearbox |
| 22 - | Sealing ring |
| q | in the angle gearbox for the right flange shaft |
| q | replace → Chapter |
|
|
|
|
