Transport the gearbox and secure to the assembly support
Transport the gearbox and secure to the assembly support
Transport the gearbox and secure to the assembly support
Special tools and workshop equipment required
t
Ring bolt -3368- (2 pieces)
t
Shackle -10-222 A /12-
t
Gearbox mount -T30109 (VW 353)-
t
Gearbox mount -T30108-
t
Lifting device -MP9-201 (2024 A)-
t
Assembly stand -MP9-101-
Transporting the gearbox
–
Screw the ring bolt -3368- into the threaded bore of the gearbox up to the stop and secure with nut M10. Subsequently hook a workshop crane in the shackle -10-222 A /12-.
Secure the gearbox in the gearbox mount -T30109 (VW 353)-
Note
Before the gearbox can be turned horizontally, both ventilation caps -arrows- must be removed and the openings must be closed with suitable screw plugs so that no oil can flow out.
Raise the gearbox on the assembly stand -MP9-101-
The gearbox is raised together with the gearbox mount -T30109 (VW 353)- on the assembly stand.
Attach gearbox to assembly stand -MP9-101-
–
Screw the gearbox mount -T30109 (VW 353)- with screws -arrows- onto the gearbox mount -T30108-.