skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Injection valves > < Engine control unit

Yeti

Removing and installing air filter
Removing and installing air filter
Special tools and workshop equipment required
t  Pliers for spring strap clamps
Removing
   
–  Press the catches -arrows- and take the cover -1- from the inlet connection.
–  Pull the inlet connection out of the intake air duct.
–  Remove the spring strap clamp -2- with the intake hose from the exhaust gas turbocharger.
  N24-10428
–  Detach vacuum hose -1- at air filter housing.
–  Unscrew the fixing screw -2- and pull the air filter housing towards the top from the bearing bolts -3-.
Install
Installation is carried out in the reverse order. Pay attention to the following:
  N24-10429
–  Press the air filter housing from the top onto the bearing bolts -3-.
–  Tighten fixing screw -2- to 8 Nm.
–  Fit the vacuum hose -1- at the connection fitting of the air filter housing.
  N24-10429

Injection valves > < Engine control unit