–
| Open lock ring with the wrench -T30101 (3087)-. |
Note When installing, ensure that the float arm of the sender for fuel gauge display -G- is not bent. |
–
| Pull the fuel delivery unit and the gasket ring out of the opening of the fuel tank. |
Note You must empty the old fuel delivery unit before disposing of it if you wish to replace it. |
–
| The fuel delivery unit is installed in the reverse order. However, pay attention to the following: |
Note t
| Insert new dry gasket ring into the opening of the fuel tank. |
t
| The gasket ring must only be moistened on the inside with fuel before assembly of the fuel delivery unit. |
t
| Do not bend the sender for fuel gauge display when installing it. |
|
|
|