Yeti
|
1 - | Hanger |
q | replace if damaged |
2 - | 23 Nm |
3 - | 20 Nm |
4 - | Tunnel bridge |
5 - | Retaining strap |
q | replace if damaged |
6 - | Rear silencer |
q | for first equipment building unit with middle silencer; replace individually when carrying out repairs |
q | Align exhaust system free of stress → Chapter |
q | Separate the exhaust system → Chapter |
7 - | Hanger |
q | replace if damaged |
8 - | The middle silencer |
q | for first equipment building unit with rear silencer; replace individually when carrying out repairs |
q | Align exhaust system free of stress → Chapter |
q | Separate the exhaust system → Chapter |
9 - | Clamping sleeve, 23 Nm |
q | Tighten bolted connections evenly |
q | Fitting position → Chapter |
10 - | 23 Nm |
11 - | Hanger |
q | replace if damaged |