skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing parts of the fuel supply system > < Disconnect connector for accelerator pedal module and fit on

Yeti

Step 5: metal swarfs are present in the high pressure pump
Step 5: metal swarfs are present in the high pressure pump
–  Replace the following high pressure components:
t  High pressure pump → Chapter.
t  High pressure lines → Chapter.
t  Fuel high pressure reservoir → Chapter.
t  Fuel pressure regulating valve -N276- → Chapter.
t  Fuel pressure sender -G247- → Chapter.
t  Injection units → Chapter.
t  Fuel return-flow lines → Chapter.
t  Additional fuel pump -V393- in engine compartment → Chapter.
–  Completely fill up the fuel tank with diesel fuel.
–  Filling and bleeding the high pressure pump and the fuel system → Chapter.
   

Removing and installing parts of the fuel supply system > < Disconnect connector for accelerator pedal module and fit on