Yeti
Radiator with a radiator fan - Summary of components |
1 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant → Chapter |
2 - | Screw cap |
q | Test pressure 0.14...0.16 MPa (1.4...1.6 bar) |
q | check → Chapter |
3 - | Connector |
4 - | 3 Nm |
5 - | Expansion reservoir |
6 - | O-ring |
q | replace if damaged |
7 - | Bottom coolant hose |
q | to connection fitting of 4/2 way valve with coolant regulator at cylinder block |
q | connection diagram for coolant hoses → Chapter |
8 - | Radiator fan -V7- |
q | removing and installing → Chapter |
9 - | Fan shroud |
q | removing and installing → Chapter |
10 - | 5 Nm |
11 - | Connector |
12 - | 5 Nm |
13 - | Top coolant hose |
q | To connection fitting at cylinder head |
q | connection diagram for coolant hoses → Chapter |