Skoda Workshop Service and Repair Manuals

Removing and installing fan shroud and radiator fan Removing

For vehicles with a fan –  Unscrew top screws -top arrows- of the fan shroud.

For vehicles with two fans –  Unscrew top screws -top arrows- of the fan shroud. Continued for all vehicles –  Remove the sound dampening system → Body Work; Rep. gr.50.

–  Remove the left charge air hose, to do so slacken the hose clamps -1 and 2-.

For vehicles with a fan –  Unplug connector -1-. –  Unscrew bottom screw -bottom arrows- of the fan shroud. –  Remove fan shroud with radiator fan downwards. –  Release the screws of the fan and remove the radiator fan from the shroud.

For vehicles with two fans –  Unplug connector -1-. –  Unscrew bottom screw -bottom arrows- of the fan shroud. –  Remove fan shroud with radiator fans downwards.

–  Separate plug connection -1- and expose cables. –  Unscrew the nuts -arrows- and remove the radiator fan from the fan shroud. Install Installation is performed in the reverse order, pay attention to the following points: t  Tightening torques → Chapter and → Chapter.