skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Immobiliser > < Removing and installing the switch for the power windows on the front and rear passenger's side

Yeti

Removing and installing door warning lamp
Removing and installing door warning lamp
Removing
–  Switch off the ignition and all electrical components.
   
–  Use a cross-head screwdriver to grasp behind the lens and carefully lever out lamp.
–  Disconnect the plug connection.
  S94-0085
–  Tilt out the cover of the light -arrow-.
  A96-0481
–  Carefully pull the light bulb (W5W) out of the socket and mount a new one.
Install
Installation is carried out in the reverse order.
  N96-0347

Immobiliser > < Removing and installing the switch for the power windows on the front and rear passenger's side