ForTwo L3-1.0L (2009)
^
Vehicle speed display
^
Output of the important operating condition of the vehicle
^
Warning at critical vehicle operating conditions (visual and acoustic)
^
Information display for various systems
^
Display for maintenance interval display
Networking
The instrument cluster functions as a gateway between CAN and CAN-B.
Display elements
^
Left turn signal indicator lamp
^
Right turn signal indicator lamp
^
High beam indicator lamp
^
Alternator charge monitoring and warning lamp
^
Brake fluid and parking brake warning lamp
^
Seat belt warning lamp
^
Airbag indicator and warning lamp
^
ABS indicator lamp
^
Electric steering indicator lamp
^
"CHECK ENGINE" MIL
^
Oil pressure warning lamp
^
ESP warning lamp
^
Coolant temperature warning lamp
^
Tire pressure monitor warning lamp
^
Low beam indicator lamp
^
Electronic speedometer (A1p8)
^
Multifunction display (A1p13)
^
Tank cap monitoring warning lamp
All indicator and warning lamps are light emitting diodes.
Operation
The lower left button in the instrument cluster can be used to switchover the multifunction displays.
The lower right button in the instrument cluster can adjust the instrument cluster illumination at circuit 15 ON and circuit 58 ON in five dimmer stages to
match individual requirements.
Activate
Circuit 15 ON activates the instrument cluster. The multifunction display shows the current content at any given time, switches on the instrument cluster
illumination and the needle for the speed display is shown on the display field.
After circuit 15 OFF the instrument cluster remains active for another 30 s. The speed display needle disappears from the display field behind a cover.
For circuit 15 OFF the instrument cluster can be activated the following preconditions:
^
Circuit 58 ON
The instrument cluster illumination is switched on and the current contents of the multifunction display are displayed. After circuit 58 OFF the
instrument cluster remains active for another 30 s.
^
By pressing a button on the instrument cluster.
The multifunction display illumination is switched on for 30 s and the current content displayed.
Acoustic signals
The following acoustic signals are produced and output via the sound signal generator integrated in the instrument cluster:
^
Turn signal indicator
^
Warning and information signals
Turn signal indicator
The turn signal indicator is always accompanied by an acoustic clicking sound generated in the same rhythm. The acoustic turn signal indicator is
actuated with:
^
Turn signaling (at double frequency if a turn signal lamp fails)
^
Hazard warning flashing
Warning and information signals
A warning or signal tone is emitted:
