ForTwo L3-1.0L (2009)
3
Lift locking catch (2) of retaining cap (4) using a suitable tool (1).
4
Pull coupling housing (3) from retaining cap (4) in direction shown by arrow.
Unfasten secondary release on version with cap
5
Detach cover (1) from cap (2) in direction of arrow over the catch mechanism.
6
Remove connector housing (3) from cap (2) in direction of arrow.
Unfasten secondary release on version with 2nd contact retainer
7
Using a suitable tool, open the contact retainer (1).
8
Pry up the contact retainer (1) in direction shown by arrow.
Unfasten secondary release on version with lock tab