ForTwo L3-1.0L (2009)
1
Insert release tool with RK 1.5 ejector from front side into contact cavity of connector (1).
If high pressure is applied, the bridges of the contact cavities may break.
Spring shackles at contact pin (2) are pressed together with sleeve (3) of release tool with RK 1.5 ejector.
2
Press contact pin (2) from its seat in housing using plunger (4) on release tool with RK 1.5 ejector against spring force of tool.
3
Gently pull the respective line to remove the contact pin (2) from the connector (1).
AR00.19-P-0120-23A Remove contacts from Siemens ELO coupling
AR00.19-P-0120-23A Remove Contacts From Siemens ELO Coupling
220 589 04 99 00, New passenger vehicle wiring harness repair kit
