ForTwo L3-1.0L (2009)
5
Attach blade holder with clamping pliers and MQS blade from above through opening in exposed connector housing (1) at spring shackle of
contact pin (2).
6
Press the spring shackle on the contact pin (2) down and slide the contact pin (2) out of the contact cavity of the connector housing (1). Tug the
corresponding cable at the same time to assist the removal procedure.
AR00.19-P-0120-28A Remove contacts from YAZAKI 1.5 system coupling
AR00.19-P-0120-28A Remove Contacts From YAZAKI 1.5 System Coupling
220 589 04 99 00, Unfasten secondary release with safety frame