ForTwo L3-1.0L (2009)
Fuel: Specifications
BB00.40-P-0119-00A Additives And Secondary Additives For Fuels
- sheet 119.0
Commonly commercially available fuels are blends of a variety of compounds, principally hydrocarbons with different chemical and physical properties.
To meet the demands made today with regard to fuels, the basic fuel is provided with additives during production. These additives are chemical
compounds which are soluble in fuel and must be of an organic type (exception: lead organic compounds in leaded fuel) and able to alter existing
properties or to add additional properties to the fuel.
These additives prevent or reduce e.g. coking of valves, deposits of combustion products in the engine and corrosion damage in the fuel system of
gasoline engines. The practical properties of diesel fuel can likewise be improved with additives.
Extensive research has shown that the use of gasoline and diesel fuels with high additivity levels for the longevity and cleanliness of engines and fuel
systems, maintenance of favorable exhaust emission values as well as achieving good operational characteristics is a necessary measure which in the long
term is also an economic one.
In terms of the supply of such fuels, the individual customer must rely on the filling stations that he/she visits selling such fuels with additives; the
opinion of large companies passed-on to us has shown that this is the case nationally, and is usually the case in respect of independent filling stations not
tied to major suppliers. Fleet customers are usually able to ensure the supply of products with additives in bilateral negotiations; we recommend these
customers to insist forcefully on such fuels.
The correct selection, application and metering of such additives depend on detailed research in the laboratory, on test benches and in vehicles, so that
the effect of the additives is optimized for the respective fuel, additives are adapted to each other and do not cause any negative side effects. Since the
consumer will generally not have the required facilities for this, mixing additives to fuels may be the exclusive preserve of the manufacturers of such
fuels.
However, drivers are constantly being offered fuel additives with the promise of huge success, such as higher engine output at lower fuel consumption,
for example. For better distinction, we have given these additives the name of secondary additives.
Our vehicle engines do not require such secondary additives, since in most cases uniform and adequate grades of fuel can be assumed. If in some
countries diesel fuels have less favorable characteristics (e.g. high content of sulfur), the use of engine oils approved by us is particularly important.
Additionally, any increase of the sulfur content in diesel fuel goes hand-in-hand with a reduction in engine oil-change intervals (generally regulated using
the onboard computer), this measure is significantly more effective than adding any secondary additives.
Special attention should be paid to making sure that only the fuel grade recommended by us is used. The use of secondary additives on the other hand,
only involves additional and unnecessary expense.
The application of secondary additives is always at the sole risk of the operator of the vehicle, since their use may impair the warranty issued both by the
manufacturer of the vehicle and the fuel supplier; for gasoline vehicles with catalytic converters and diesel vehicles with particulate filters, it should be
categorically avoided.
An exception to this are certain flow improvers or microbiocides. It is possible, to a certain extent, for these to improve the low temperature properties of
diesel fuel or to avoid the growth of microorganisms in diesel fuel. Only the products approved on the relevant Sheet 137.1 and 138.1, respectively, may
be used. It is important to refer to the corresponding notes. Use of such additives should be regarded as an exceptional measure in the last resort.
