ForTwo L3-1.0L (2009)
Engine Control Module: Description and Operation
GF07.61-P-6000MCU Component description for the ME-SFI (ME) control unit
GF07.61-P-6000MCU Component Description For The ME-SFI [ME] Control Unit
N3/10
ME-SFI [ME] control unit
Location
The ME-SFI [ME] control unit is located in the trunk, behind the right side paneling.
Task
The ME-SFI [ME] control unit controls, monitors and coordinates the entire engine control.
Function
The ME-SFI [ME] control unit is a subscriber on the Control Area Network (data bus/CAN bus) (CAN) and controls the following systems:
^
Fuel supply
^
Injection control
^
Secondary air injection
^
Lambda control
^
Ignition system
^
Immobilizer
Communication with the following components takes place via the CAN:
^
Instrument cluster (A1)
^
Restraint systems control unit (N2/7)
^
SAM control unit (N10/10)
^
Automated manual transmission control unit (N15/6)
^
Heater/air conditioning operating unit (N23) (for code (I01) Air conditioning Plus)
^
ESP control unit (N47-5)
^
Steering assist control unit (N68) (with code (V26) Power steering, EPS (FFO))
