smart Workshop Repair Guides

Smart Workshop Service and Repair Manuals

Power Window Control Module|Locations|Page 89 > < AR26.19-P-0100MCU Remove/Install Automated Manual Transmission Control Unit|Page 84
Page 1
background image

Power Window Control Module: Locations

GF72.29-P-6012MCC Power Window Control Unit, Component Description

- with CODE (V43) Power window

N57/2 Power window convenience feature control unit

Location

The power window convenience feature control unit is located on the left side below the instrument panel on the crossmember.

Task

The power window convenience feature control unit takes over the control of the side windows. The control unit monitors the power consumption of the
connected loads and thereby recognizes lockup or the limit stop of the side window.

The following switches are read in:

^

Left power window switch (S21/1)

^

Right power window switch (S21/2)

The following loads are switched:

^

Left power window motor (M10/3)

^

Right power window motor (M10/4)

Power Window Control Module|Locations|Page 89 > < AR26.19-P-0100MCU Remove/Install Automated Manual Transmission Control Unit|Page 84