ForTwo L3-1.0L (2009)
2
Insert blade holder with clamping pliers and SLK 2.8 blade from front side though openings at contact cavity of connector (1).
Insert tool carefully to prevent damaging webs at openings of contact cavity.
This presses together the springs of the contact pin (2).
3
A slight tug on the corresponding cable will remove the contact pin from the connector.
Rocking the contact pin back and forth, thus making use of the full housing tolerance, may help to unpin the contact.
AR00.19-P-0120-02A Remove contacts from sensor laminated contact coupling
AR00.19-P-0120-02A Remove Contacts From Sensor Laminated Contact Coupling
- Sensor-blade contact coupling Design 97
220 589 04 99 00, New passenger vehicle wiring harness repair kit
