ForTwo L3-1.0L (2009)
3
Insert blade holder with clamping pliers and MQS blade from front side though opening above contact cavity of connector housing (3).
This presses down the spring shackle at the contact pin (2).
4
A slight tug on the corresponding cable will pull the contact pin (2) out of the cavity of the plug.
Foil contacts must be unpinned at the same time. Tug on the foil while pressing down the spring to remove the foil.
AR00.19-P-0120-04A Remove contacts from micro quadlock system coupling
AR00.19-P-0120-04A Remove Contacts From Micro Quadlock System Coupling
- Micro-Quadlock-System-Coupling Version 1
220 589 04 99 00, New passenger vehicle wiring harness repair kit
