ForTwo L3-1.0L (2009)
1
Insert blade holder with clamping pliers with JPT/SPT blade or MCP 2.8/Fl. 2.8/JPT/SPT blade from front side through openings at contact cavity
of connector (1).
This presses together the spring shackles (2) on the contact pin (3).
2
Pull lightly on the corresponding line to remove the contact pin (3) from the plug (1).
AR00.19-P-0120-12A Remove contacts from FIN sensor contact coupling
AR00.19-P-0120-12A Remove Contacts From FIN Sensor Contact Coupling
220 589 04 99 00, New passenger vehicle wiring harness repair kit