ForTwo L3-1.0L (2009)
2
Insert suitable tool underneath locking tabs (1).
3
Pry up the lock tabs (1) in direction shown by arrow.
Unfasten secondary release on version with retaining cap
4
Insert a suitable tool (1) between the retaining cap (3) and the clutch housing (2).
5
Slide the retaining cap (3) against the detent resistance from the clutch housing (2) in direction shown by arrow.
Unfasten secondary release on version with locking cap
6
Move the tabs on the locking cap (4) in direction of arrow.
7
Remove locking cap (4) from coupling (5).
Unpin female contacts from coupling